How to Replace a Cracked Smartphone Screen Like a Pro

We've all been there - that sinking feeling when your beloved smartphone slips from your hand and the screen shatters into a spiderweb of cracks. It's a common mishap, and while it's frustrating, the good news is that you can replace a cracked smartphone screen like a pro with the right tools and a little patience. In this guide, we'll walk you through the process step-by-step, adding a human touch to make it easier and less intimidating.

 
Step 1: Gather Your Tools

Make sure you have the required tools before you start. You'll need:

  • ● a new screen that works with your smartphone's model.

  • ● Screwdrivers (Phillips and sometimes Torx) of the appropriate size.

  • ●Plastic prying tools or a case opener tool.

  • ● Adhesive strips or glue (if not included with the replacement screen).

  • ● A clean, dust-free workspace with good lighting.

Enquiry Now


Step 2: Safety First

Before diving in, power off your smartphone and remove any external accessories, like the case or SIM card tray. Remove the replaceable battery from your phone if it has one. This step is crucial for your safety and the device's.

Step 3: Disassemble the Device

Start by removing the screws around the edge of the device. Be sure to keep track of them, as they are often different sizes and must be returned to their original positions during reassembly. Once the screws are out, carefully pry open the device using plastic prying tools or a case opener tool. Go slowly and gently, as you don't want to damage any internal components.

Step 4: Disconnect the Old Screen

Inside, you'll find the old, cracked screen connected to the device's motherboard by a ribbon cable. Use your tweezers to gently disconnect this cable. It may be secured with a small clip or adhesive.

Step 5: Remove the Old Screen

With the ribbon cable detached, you can remove the old screen. Be cautious not to touch the delicate components beneath it. Dispose of the old screen responsibly, following your local e-waste recycling guidelines.

Step 6: Prepare the New Screen

Before installing the new screen, check it for any defects or damage. Remove any protective films, if present, and clean the surface to ensure it's free of fingerprints and dust.

Step 7: Install the New Screen

Carefully attach the ribbon cable from the new screen to the motherboard. Make sure it's properly seated and secure it with any clips or adhesive as needed.

Step 8: Reassemble the Device

Put the device back together in the reverse order of disassembly. Start by reattaching the screws, making sure to return each screw to its original location. Be meticulous, as misplacing screws can cause problems later.

Step 10: Final Touches

If adhesive strips or glue were not included with the replacement screen, apply them carefully to secure the new screen in place. Make sure it's aligned correctly.

Conclusion

Replacing a cracked smartphone screen might seem like a daunting task, but with the right tools and a methodical approach, you can do it like a pro. Remember to work patiently, keep track of your screws, and handle the delicate components with care. If you're unsure at any point, it's always a good idea to seek professional help. By following these steps and adding a human touch, you can revive your smartphone and enjoy a pristine screen once again.

Call nowWhatsApp